学习啦>学习电脑>网络知识>路由器>路由器设置>cisco思科>

ip电话设置cisco

春健分享

  思科路由器是世界闻名的通讯设备之一了,有不少用户不知道怎么设置cisco ip电话?学习啦小编为大家分享了具体操作方法,供大家参考!

  设置思科IP电话参考以下命令:

  第一种配置方式:

  Router(config)#telephony-service setup ----开启ipPhone配置

  --- Cisco IOS Telephony Services Setup ---

  Do you want to setup DHCP service for your IP Phones? [yes/no]: yes ----配置DHCP

  Configuring DHCP Pool for Cisco IOS Telephony Services :

  IP network for telephony-service DHCP Pool:192.168.2.0

  Subnet mask for DHCP network :255.255.255.0

  TFTP Server IP address (Option 150) :192.168.2.1

  Default Router for DHCP Pool :192.168.2.1

  Do you want to start telephony-service setup? [yes/no]: yes ----开启电话语音

  Configuring Cisco IOS Telephony Services :

  Enter the IP source address for Cisco IOS Telephony Services :192.168.2.1

  Enter the Skinny Port for Cisco IOS Telephony Services : [2000]: ----语音端口

  How many IP phones do you want to configure : [0]: 2

  Do you want dual-line extensions assigned to phones? [yes/no]: yes

  What Language do you want on IP phones :

  0 English

  1 French

  2 German

  3 Russian

  4 Spanish

  5 Italian

  6 Dutch

  7 Norwegian

  8 Portuguese

  9 Danish

  10 Swedish

  11 Japanese

  [0]: 0

  Which Call Progress tone set do you want on IP phones :

  0 United States

  1 France

  2 Germany

  3 Russia

  4 Spain

  5 Italy

  6 Netherlands

  7 Norway

  8 Portugal

  9 UK

  10 Denmark

  11 Switzerland

  12 Sweden

  13 Austria

  14 Canada

  15 Japan

  [0]: 0

  What is the first extension number you want to configure : 800 ----电话分机号

  Do you have Direct-Inward-Dial service for all your phones? [yes/no]: yes

  Enter the full E.164 number for the first phone :888

  Do you want to forward calls to a voice message service? [yes/no]: yes ----语音信箱

  Enter extension or pilot number of the voice message service:899

  Call forward No Answer Timeout : [18]:

  Do you wish to change any of the above information? [yes/no]: no ----表示不修改了

  CNF-FILES: Clock is not set or synchronized,

  retaining old versionStamps

  ---- Setup completed config ---

  Router(config)#

  *Mar 1 00:23:46.743: %LINK-3-UPDOWN: Interface ephone_dsp DN 1.1, changed state to up

  *Mar 1 00:23:46.747: %LINK-3-UPDOWN: Interface ephone_dsp DN 1.2, changed state to up

  *Mar 1 00:23:46.747: %LINK-3-UPDOWN: Interface ephone_dsp DN 2.1, changed state to up

  *Mar 1 00:23:46.751: %LINK-3-UPDOWN: Interface ephone_dsp DN 2.2, changed state to up

  Router#show run

  Building configuration...

  !

  ip dhcp pool ITS

  network 192.168.2.0 255.255.255.0

  option 150 ip 192.168.2.1

  default-router 192.168.2.1

  !

  !

  telephony-service

  max-ephones 2

  max-dn 2

  ip source-address 192.168.2.1 port 2000

  auto assign 1 to 2

  create cnf-files version-stamp Jan 01 2002 00:00:00

  dialplan-pattern 1 8.. extension-length 3

  voicemail 899

  max-conferences 4 gain -6

  transfer-system full-consult

  !

  !

  ephone-dn 1 dual-line

  number 800

  call-forward busy 899

  call-forward noan 899 timeout 18

  !

  !

  ephone-dn 2 dual-line

  number 801

  call-forward busy 899

  call-forward noan 899 timeout 18

  !

  !

  ephone 1

  !

  !

  !

  ephone 2

  !

  !

  !

  line con 0

  line aux 0

  line vty 0 4

  !

  !

  end

  Router#show telephony-service ?

  admin Show telephony-service admin username and password

  all Show telephony-service details

  dial-peer Show telephony-service dialpeers

  directory-entry Show telephony-service directory-entry

  ephone Show ephone configuration

  ephone-dn Show ephone-dn configuration

  ephone-template Show ephone-template configuration

  tftp-bindings Show telephony-service tftp-server bindings

  voice-port Show telephony-service voice ports

  | Output modifiers

  <cr>

  Router#show telephony-service

  CONFIG (Version=3.3)

  =====================

  Version 3.3

  Cisco CallManager Express

  For on-line documentation please see:

  www.cisco.com/univercd/cc/td/doc/product/access/ip_ph/ip_ks/index.htm

  ip source-address 192.168.2.1 port 2000

  max-ephones 2

  max-dn 2

  max-conferences 4 gain -6

  dspfarm units 0

  dspfarm transcode sessions 0

  hunt-group report delay 1 hours

  max-redirect 5

  dialplan-pattern 1 8.. extension-length 3

  voicemail 899

  time-format 12

  date-format mm-dd-yy

  timezone 0 Greenwich Standard Time

  keepalive 30

  timeout interdigit 10

  timeout busy 10

  timeout ringing 180

  caller-id name-only: enable

  edit DN through Web: disabled.

  edit TIME through web: disabled.

  Log (table parameters):

  max-size: 150

  retain-timer: 15

  create cnf-files version-stamp Jan 01 2002 00:00:00

  transfer-system full-consult

  auto assign 1 to 2

  local directory service: enabled.

  第二种配置方式:

  第1步 先配置DHCP:

  r1(config)#ip dhcp pool CME

  r1(dhcp-config)#network 192.168.1.0 /24

  r1(dhcp-config)#?

  DHCP pool configuration commands:

  accounting Send Accounting Start/Stop messages

  bootfile Boot file name

  class Specify a DHCP class

  client-identifier Client identifier

  client-name Client name

  default-router Default routers

  dns-server DNS servers

  domain-name Domain name

  exit Exit from DHCP pool configuration mode

  hardware-address Client hardware address

  host Client IP address and mask

  import Programatically importing DHCP option parameters

  lease Address lease time

  netbios-name-server NetBIOS (WINS) name servers

  netbios-node-type NetBIOS node type

  network Network number and mask

  next-server Next server in boot process

  no Negate a command or set its defaults

  option Raw DHCP options

  origin Configure the origin of the pool

  relay Function as a DHCP relay

  subnet Subnet allocation commands

  update Dynamic updates

  utilization Configure various utilization parameters

  vrf Associate this pool with a VRF

  r1(dhcp-config)#default-router 192.168.1.1

  r1(dhcp-config)#option 150 ip 192.168.1.1

  r1(dhcp-config)#exit

  第2步 配置telephony服务

  r1(config)#telephony-service

  r1(config-telephony)#max-ephones 2

  r1(config-telephony)#max-dn 2

  r1(config-telephony)#auto assign 3 to 4

  r1(config-telephony)#ip source-address 192.168.1.1 port 2000

  r1(config-telephony)#exit

  第3步 配置ephone

  r1(config)#ephone-dn 1

  r1(config-ephone-dn)#number 111

  r1(config-ephone-dn)#exit

  r1(config)#ephone-dn 2

  r1(config-ephone-dn)#number 112

  r1(config-ephone-dn)#exit

  学习啦小编分享了cisco ip电话设置的方法,希望大家喜欢。

    572403